-
Ampact clamp installation tool
Installation Steps 1. Insert the conductor and the wedge end into the groove until to the marking line. 2. Put The clamp on the gun seat and locate it, with wire thread insert. Make sure the end of the gun tightly top the wedge. 3. Remove the back cover of the gun and load the bullet core. Then install the back cover and tighten it. 4. Pull the rear cable to the right place and press the button. Bullet core firing,The push rod will push the wedge core into the inner of the clamp 5. Remove th... -
Wedge Connector Crimp tools
Type & Specifications ● USe for installing JXL series wedge Connector : JXL1, JXL-2. JXL-3,JXL-4, ● JXL-small for JXL-1,XL-2 “C”sharp wedge connector ● JXL-big for JXL-3,JXL-4 “C”sharp wedge connector Estructuraa 1. fixed handle 2. Free handle 3 .Cylinder body 4.Oil Pump 5.Pivot Screw 6.Unloading Device 7.Clamping head 8.Pision Directions 1.According to the connector “C” of the body of the wedge point the type of tools. JXL-1, JXL-2 must ... -
JXD Grounding wedge clamp
Features
1. Good contact performance: wedge type wire clip has a large contact surface with the wire, a constant clamping force and a small DC resistance ratio;
2. Strong overload capacity: the cross-sectional area of the wedge is relatively large, so the overload capacity is more than 2 times of the verification current;
3. Good thermal stability: through the thermal cycle test, it can always operate under small DC resistance;
4. Reliable connection: after the wedge clamp is installed correctly, the wedge will never fall off;
5. No magnetic loss: there is no steel bolt connection on the wedge type wire clip, and no magnetic loss on the wire clip;
6. Strong comprehensive performance: good contact and thermal stability, strong overload capacity, can achieve maintenance free, long life.
7. Good economy: the price is better than that of bolt type wire clip in terms of price and practicality. -
Wedge connector
Features
1. Good contact performance: wedge type wire clip has a large contact surface with the wire, a constant clamping force and a small DC resistance ratio;
2. Strong overload capacity: the cross-sectional area of the wedge is relatively large, so the overload capacity is more than 2 times of the verification current;
3. Good thermal stability: through the thermal cycle test, it can always operate under small DC resistance;
4. Reliable connection: after the wedge clamp is installed correctly, the wedge will never fall off;
5. No magnetic loss: there is no steel bolt connection on the wedge type wire clip, and no magnetic loss on the wire clip;
6. Strong comprehensive performance: good contact and thermal stability, strong overload capacity, can achieve maintenance free, long life.
7. Good economy: the price is better than that of bolt type wire clip in terms of price and practicality.
